| Size |
10" L x 3.0" W x 2.5" H (25.5 cm x 7.6 cm x 6.4 cm) |
| Weight |
26 oz (738 g) |
| Sensors |
Photoionization sensor with standard 10.6 eV or optional 9.8 eV or 11.7 eV lamps |
| Battery |
- Rechargeable, external field-replaceable Lithium-Ion battery pack
- Alkaline battery adapter
|
| Operating Hours |
16 hours of operation (12 hours with alkaline battery) |
| Displays |
4 lines, 28 x 43 mm, with LED backlight for enhanced display readability |
| Keypads |
1 operation and 2 programming keys, 1 flashlight on/off |
| Direct Readout |
Instantaneous reading:
- VOCs as ppm by volume
- High values
- STEL and TWA
- Battery and shutdown voltage
- Date, time, temperature
|
| Alarms |
95dB at 12" (30 cm) buzzer and flashing red LED to indicate exceeded preset limits:
- High: 3 beeps and flashes per second
- Low: 2 beeps and flashes per second
- STEL and TWA: 1 beep and flash per second
- Alarms latching with manual override or automatic reset
- Additional diagnostic alarm and display message for low battery and pump stall
|
| EM/RFI |
Highly resistant to EMI/RFI Compliant with EMC Directive 2004/108/EC |
| IP Rating |
- IP67 unit off and without flexible probe
- IP65 unit running
|
| Data Logging |
Standard 6 months at one-minute intervals |
| Calibration |
Two-point or three-point calibration for zero and span. Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates |
| Sampling Pump |
- Internal, integrated flow rate at 500 cc/mn
- Sample from 100' (30m) horizontally and vertically
|
| Low Flow Alarm |
Auto shut-off pump at low flow condition |
| Communications |
- Download data and upload instrument set-up from PC through charging cradle or optional Bluetooth™
- Wireless data transmission through built-in RF modem
|
| Frequency |
902 to 928 MHz (license-free), 2.400 to 2.4835 GHz (license-free), 433 MHz, 869 MHz |
| RF Range |
Up to 500' (152m; 900 MHz, 433 Mhz, 869 Mhz), extendable with RAELink3 Repeater to 2 miles (3.2km) |
| Hazardous Area Approval |
- US and Canada: Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D
- Europe: ATEX II 2G EEx ia IIC T4
|
| Temperature |
-4° to 113° F (-20° to 50° C) |
| Humidity |
0% to 95% relative humidity (non-condensing) |
| Attachment |
Durable bright yellow rubber boot |
| Warranty |
3 years for 10.6 eV lamp, 1 year for pump, battery, sensor and instrument |
