ACTIVE  ENVIRONMENTAL  SOLUTIONS

Home | About Us | Contact Us | Hire Home | News | PRODUCTS | Search | Technical | Exhibitions | WHATS NEW
 
AIR SAMPLING
NOISE & SOUND
GAS DETECTION
RADIATION
VIBRATION
PRODUCTS BY SUPPLIER
HIRE
AIR MEASUREMENT
BIOLOGICAL MONITORS
TRANSMITTERS
LIGHT METERS
Hire Home
Knowledge
WHATS NEW

QuickTake 15

SKC Sample Pump

  • Ideal for mold sampling
    • Designed specifically for the short sampling times for mold screening
    • Spore traps (VersaTrap cassettes) fit easily onto pump inlet
  • Grab sample pump with constant flow from 5 to 15 L/min
    • Maintains set flow throughout a sampling period for sample integrity
    • Ideal for use with spore traps (VersaTrap cassettes), BioStage 200 Impactor, wall cavity samplers, or filter cassettes including microvacuum cassettes
    • Suitable for applications requiring constant flow in 5 to 15 L/min range
  • Run times up to 4 hours on one Li-Ion battery charge
    • Run pump from AC charger/adapter for extended sampling
    • Reliable, rechargeable lithium-ion (Li-Ion) battery pack
  • Convenient programmable timer for unattended sampling
    • Select sample time presets or customize timer from 1 to 999 minutes
    • Continuous run with manual shut-off
    • Intermittent sampling
    • Large, easy-to-use keypad
  • Compact and portable
    • Easy handheld operation
    • Optional shoulder strap available
    • Lightweight, only 32 oz (0.9 kg)
    • 10.3 x 4.6 x 2.4 in (26.2 x 11.7 x 6.1 cm)
  • Versatile sampling accessories
    • Tripod for measurements at breathing zone
    • Wand for ductwork and other hard-to-reach areas
  • Easy to use
    • Simple no-tool calibration
    • End-of-cycle visual and audible alarms
  • High contrast digital display
  • CE marked (models with 223-245 charger only)

QuickTake 15


The SKC QuickTake®15 constant flow diaphragm pump maintains a set flow rate throughout the sampling period, compensating for the inherent back pressure created by sampling media and for increases in back pressure as sample collects on the media. Unlike similar pumps, the QuickTake 15:

  • Maintains true constant flow
  • Can be calibrated with any primary standard calibrator for valid calibration
  • Does not require a special rotameter or hot-wire anemometer for calibration
  • Can be used with remote sampling media or media that creates back pressure such as microvacuum cassettes

The SKC QuickTake 15 Sample Pump is especially easy to use with Spore traps (VersaTrap cassettes)

  • Spore traps (VersaTrap Cassettes) fit directly and easily onto pump inlet.
  • Provides optimum flow rate
  • Can be used with Spore traps (VersaTrap Cassette) attached to sampling wand accessory.
  • Mount with Spore traps (VersaTrap Cassette) on tripod accessory to monitor breathing zone level.
  • Use with Spore traps (VersaTrap Cassette) and wall adapter for mold screening in wall cavities.