Active Environmental Solutions RAE Systems Gas Detectors PID

ACTIVE ENVIRONMENTAL SOLUTIONS

Home | About Us | Contact Us | Hire Home | News | PRODUCTS | Search | Technical | Exhibitions | WHATS NEW

AIR SAMPLING PUMPS

CALIBRATION EQUIPMENT

BIOAEROSOL SAMPLERS

PASSIVE SAMPLERS

REALTIME DUST MONITORS

SAMPLING ACCESSORIES

SORBENT TUBES & FILTERS

PRODUCTS BY SUPPLIER

AIR MEASUREMENT

BIOLOGICAL MONITORS

SORBENT TUBES & FILTERS

Filters

Glass fiber, Mixed Cellulose Ester (MCE), Teflon (PTFE), Polyvinyl Chloride (PVC), and Quartz, filters and filter accessories including filter supports, filter cassette blanks, and filter cassette holders. more ...

Lead Check Kits

Description LeadCheck Swabs are non-hazardous and provide a rapid, sensitive and specific test for leachable lead on any surface. When lead is detected, LeadCheck Swabs and/or the surface being tested turns pink or red on contact, depending on the concentration of lead present. In the vast majority of test situations results are obtained in less than 30 seconds. When detecting low levels of lead, or lead chromate containing pigments, results may take longer to develop. Each kit contains test confirmation cards to verify individual test results. more ..

Sorbent Tubes

Sorbent tube sampling is the NIOSH/OSHA approved method for collecting most hazardous gases and vapors from the air. Federal law has established permissible exposure limits (PELs) for workers' exposures to a variety of airborne chemical hazards. These limits are specified in several ways: eight-hour Time-Weighted Averages (TWAs), Short-Term Exposure Limits (STELs) and Ceiling values. Eight-hour TWA limits are specified for full-shift exposures. STELs are usually issued as 15 minute exposure limits and Ceiling values are issued as peak levels not to be exceeded at any time during the working day. Sorbent tubes have been established as a reliable tool for each of these sampling requirements. more ...